Readme (last update: 28.4.2015)
Author: Radek Henys (admin@mouseviator.com)

Hi,

here you find some information about the content of the archive you have downloaded.

First things first, so here comes the boring, but necessary stuff:

*** The Legal Agreement ***

The fictional repaint(s) for DHC-6 Twin Otter aircraft included in the archive is provided as is without any warranty. 
As you read with most software products, use it at your own risk. I take no responsibility for anything.

The repaint(s) included in this archive was made ... just because as many other out there, because I love flight
simulation (and firefighters, so there the two meets). 

IF NOTHING ELSE, PLEASE READ AND RESPECT FOLLOWING:
This fictional repaint(s) contains official logo of VFD Celakovice. And because of that, the whole
repaint is sort of our "business card". You may NOT publicly redistribute this repaint(s)! 
Without prior consent (see contact below), this repaint(s) may be available only on these websites:

http://mouseviator.com
http://hasici-celakovice.cz

You may NOT publish any screenshot(s) that would put any bad light on VFD Celakovice.

What that means? Of course, I do not care if you take this repaint(s) to your friend on flash drive or send it to him
using electronic way. But I do not want to see this package to be distributed publicly without prior agreement. 
About the "screenshot that would put any bad light on VFD Celakovice" - don't make any screenshot showing terrorist attack (like crashing into building), 
sexually related content, discrimination etc. Ie. don't be jerk.

If you want to edit this repaint, you can! But if you want to redistribute your edited repaint, it must be in no relation to VFD Celakovice.
So your edited livery cannot contain VFD Celakovice logo, title or anything that would connect to VFD Celakovice, anywhere!!!  
As your edited repaint has no relation to VFD Celakovice, it is your work - distribute it as you wish, but is still must be for free.

The "Fire Belle (Always Ready) 1956" pin-up painting on vertical stabiliser is a work of american pin-up girl painter of Gil Elvgren. 
Read more here: http://en.wikipedia.org/wiki/Gil_Elvgren

*** How to install? ***

The archive should contain the following folder:

texture.N450VFa

and file:


Aircraft.cfg.OKDHC.txt


1) Copy folder with textures to Aerosoft DHC-6 Twin Otter Extended aircraft folder

Navigate to folder where your Aerosoft DHC-6 Twin Otter Extended is installed.
You will find it at the "SimObjects\Airplanes\Aerosoft_DHC6_300_AMPHIB" at your flight sim folder.
The whole path might look like this:
C:\Program Files\Microsoft Games\FSX\SimObjects\Airplanes\Aerosoft_DHC6_300_AMPHIB
or
C:\Program Files\Lockheed Martin\Prepard3D v2\SimObjects\Airplanes\Aerosoft_DHC6_300_AMPHIB

Those were just examples, the location depends on where you have your flight simulator installed.

Copy the folder mentioned above (texture.OKDHC) to the folder you just found.

2) Add repaint to Aircraft.cfg

In the folder you found in step 1, there is a file called Aircraft.cfg. Open this file in notepad or another
text editor (For basic text editing, without any formatting. Make sure the file is saved again as Aircraft.cfg, not Arcraft.cfg.txt).

Scroll down the file and look for lines starting with [fltsim.X] where X is some number. There will be
[fltsim.0], [fltsim.1] etc. Find the last "fltsim" section and look what the last number is.

Open the included "Aircraft.cfg.OKDHC.txt" file and copy the whole content of the file (it is another "fltsim" section) after the last "fltsim" section into
Aircraft.cfg you have opened in previous step. 

Change the "X" in pasted "fltsim" section to the next available number. For example, if the last "fltsim" section
in the Aircraft.cfg was [fltsim.2], you will change [fltsim.X] to [fltsim.3].

Save the Aircraft.cfg file.

3) Go flying


*** Contact ***

If you want to contact me regarding anything (reasonable anything, no SPAM please), you can do so via email below.

Author: Radek Henys
Email: admin@mouseviator.com
