### What is this? 

This folder contains STL files for electronics mounts - kind of panels, board to mount ULN2003 boards that drive the 28BYJ-48 that are used
within certain flight instruments.

There are the following folders:

- Altimeter Indicator - Contains electronics mount assembly to be used on the back of Altimeter. It has three positions to mount ULN2003 boards. The source file (for Autodesk Fusion) can be found in the "1. Modified Instrument parts\Altimeter Indicator\Source" folder.
- Attitude Indicator - Contains electronics mount assembly to be used on the back of Attitude Indicator. It has two positions to mount ULN2003 boards. The source file (for Autodesk Fusion) can be found in the "1. Modified Instrument parts\Attitude Indicator\Source" folder.
- Wet Compass - Contains electronics mount assembly to hold one ULN2003 board. 

On each of these mounting panels, on the left or right side (depends on how you look at it), there is a wall with 3 holes. 
I quided the Vcc and ground cables to the ULN2003 boards through these. Then, in one corner there is another wall, with two holes. 
Those I used to guide the control cables from the ULN2003 boards towards Arduino. And the big round hole in the base, I used it to guide the cables from
the 28BYJ-48 stepper motors inside the instruments, and other cables, to this mounting board / plate.

### What is here?

- Folders that contains electronics mount panels for various instruments. Actually, these folders contain "STLs" folder, which contains the
  STL files that you can use for printing. It is structired like that to keep some order in it :)

- This readme file


### License

Just don't resell my files. That would be considered kind of forbidden. They are free. If you reshare elsewhere or further modify them,
would be nice to keep some credits.