### What is this? 


This folder contains STL files for display bezels that I designed for use with the Display panels (see folder "4. Display and other Panels") and the 11" touch screen displays.

It contains the following bezels:

- 6Pack - Contains a bezel with 8 holes. This will cover the touch screen so it can display 8 round instruments (counting on basic 6pack and 2 others).
- Airline - Contains bezel with rectangular border with vertical column in the middle, that will split the the touch screen in two screens - to display B737/A320 or another airliner PFD/ND screens.
- G1000 - Contains a bezel with rectangulat border. The simplest one which actaully does not cover the topuch screen much. It should be used with whole screen instruments, such as G1000.
- GTN750 - Contains bezel with rectangular border with vertical column almost in the middle. That is supposed to display GTN750 in the right part of the touch screen, which should not be covered by acrylic glass for touch to work, and another instruments in the left part of screen, which should be covered by acrylic glass.

### What is here?

This zip file should contain the following files and folders:

- 6Pack - STL files to print 6-pack bezel
- Airline - STL files to print bezel for airliner
- G1000 - STL files to print the bezel for G1000 like cockpit screen
- GTN750 - STL files to print the bezel for G1000 like cockpit screen
- Sources - The Autodesk Fusion projects with my PFD and MFD panels and bezels and with ELT panel
- some pictures so you can actually look what I am writing here about
- This readme file


### License

Just don't resell my files. That would be considered kind of forbidden. They are free. If you reshare elsewhere or further modify them,
would be nice to keep some credits.



