### What is this? 

This folder contains modified parts for attitude indicator made originally by Captain Bob for his C172 project:
https://captainbobsim.com/cessna-172-project/

I just made the bezel and other related parts - Lil Attitude Guppy deeper/longer by 1 mm, to better fit 3mm acrylic glass that I used.
For the inner bezel, the 1mm was used to create a "teeth" to make contact area with the glass to improve the overall together fit of the instrument.
Trie to higlight it on attached screenshot.

I designed a backplate to hold electronics boards (ULN2003) that drive the 2 28BYJ-48 stepper motors of the attitude indicator. That is part of the Autodesk Fusion project in the
Source folder. Ready to print STL file can be found in the "2. Electronics Mount" folder or in "STLs" folder.

### What is here?

- Source - folder which contains project for Autodesk Fusion. Contains the whole original instrument with my modifidications (the electronics mount panel)
- STLs - folder with STL files for printing
- some pictures so you can actually look what I am writing here about
- This readme file

### Credits

Goes to Captain Bob and everyone who contributed on the original design of the instrument, my modifications were not such a big deal :)

### License

Respect the license of creators of original content that I have built on. As for my modifications and additions,
just don't resell them. That would be considered kind of forbidden. They are free. If you reshare elsewhere or further modify them,
would be nice to keep some credits.